Products catalog

  • Utepo UTP3324S-PSB410-M0 26-Port PoE Gigabit Switch

    • General
    • Downlink Port24*10/100/1000Base-T PoE+ RJ-45(Auto-MDI/MDI-X)
    • Uplink Port2*GE Combo Ports(SFP Port is prior to RJ-45 Port)
    • Led Indicators1*Power, power supply indicator, 1*PoE-Max, PoE power indicator, 24*Link/Act, port state indicators, 2*SFP port state indicators
    • Dimensions (W*D*H)440mm*284mm*44mm
    • Input Voltage100~240V AC, 50~60Hz
    • Power Consumption≤410W (Full load including PoE)
    • MaterialMetal shell
    • InstallationRack/Desktop/Wall mounted
    • StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3z, IEEE 802.3af, IEEE 802.3at
    • Forwarding ModesStore and Forward
    • MAC Table8k, support auto learning
    • Switching Capacity156Gbps / non-blocking
    • PoE StandardIEEE 802.3af/at
    • PoE Power Supply TypeEnd-span
    • PoE Pin Assignment1/2/4/5(+), 3/6/7/8(-)
    • PoE Budget30W max for each port, 370W max for whole switch
    • Port Lightning Protection6kV
    • Operating-10℃~50℃, 10%~90% (Non-condensation)
    • Storage-40℃~70℃, 5%~90% (Non-condensation)
    • Switch Mode Default modeSwitches in this mode can function as a core switch and all the ports can communicate with each other. QoS mode: UTP3318S-PSB250-M0 port 15, 16, SFP1 and SFP2 serve as uplink ports, ports 1-8 serve as high priority port. All ports can communicate with each other separately. UTP3324S-PSB250-M0, UTP3324S-PSB410-M0 port 23, 24, SFP1 and SFP2 serve as uplink ports, ports 1-8 serve as high priority port. All ports can communicate with each other separately. CCTV mode: UTP3318S-PSB250-M0 transmission distance of ports 9-14 is extended up to 250m, but the data rate is limited to 10Mbps. UTP3324S-PSB250-M0, UTP3324S-PSB410-M0 transmission distance of ports 17-22 is extended up to 250m, but the data rate is limited to 10Mbps. VLAN mode: UTP3318S-PSB250-M0 ports 1-14 are isolated from each other but able to communicate with ports 15, 16, SFP1 and SFP2. UTP3324S-PSB250-M0, UTP3324S-PSB410-M0 ports 1-22 are isolated from each other but able to communicate with ports 23, 24, SFP1 and SFP2.