Products catalog

Home/Network Equipment and WiFi/Commutation-Switching Equipment/Routers
  •   TELTONIKA industrial 5G router LTE RUTX50

    TELTONIKA industrial 5G router LTE RUTX50

    Inquire about this item
    Price 651.46 €
    Want another price? Suggest yours!
    In stock.

    In stock: 5 pcs
    Manufacturer
    Teltonika

    • Mobile
    • Mobile module5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2); 4G (LTE) – LTE Cat 20 2.0Gbps DL, 200Mbps UL; 3G – 42 Mbps DL, 5.76Mbps UL
    • StatusSignal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID.
    • SMS/CallSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, Call utilities
    • USSDSupports sending and reading Unstructured Supplementary Service Data messages
    • Black/White listOperator black/white list
    • Band managementBand lock, Used band status display
    • APNAuto APN
    • Bridge modeDirect connection (bridge) between mobile ISP and device on LAN
    • PassthroughGateway assigns its mobile WAN IP address to another device on LAN
    • Multiple PDNPossibility to use different PDNs for multiple network access and services
    • Wireless
    • Wireless mode802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates of up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
    • WiFi securityWPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
    • ESSIDESSID stealth mode
    • WiFi usersUp to 150 simultaneous connections
    • Wireless HotspotCaptive portal (Hotspot), internal/external Radius server, built-in customizable landing page
    • Wireless mesh/roamingWireless mesh (802.11s), fast roaming (802.11r)
    • Ethernet
    • WAN1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
    • LAN4 x RJ45 port, 10/100/1000 Mbps, supports auto MDI/MDIX crossover
    • Network
    • Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL)
    • RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
    • Connection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
    • FirewallPort forwards, traffic rules, custom rules
    • DHCPStatic and dynamic IP allocation
    • DDNSSupported >25 service providers, others can be configured manually
    • SSHFSPossibility to mount remote file system via SSH protocol
    • Security
    • AuthenticationPre-shared key, digital certificates, X.509 certificates
    • FirewallPre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
    • Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
    • VLANPort and tag-based VLAN separation
    • Mobile quota controlSet up custom data limits for SIM card
    • WEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
    • Access controlFlexible access control of TCP, UDP, ICMP packets, MAC address filter
    • VPN
    • OpenVPNMultiple clients and a server can run simultaneously, 12 encryption methods
    • OpenVPN EncryptionDES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
    • GRE tunnelGRE Tunnel
    • IPsecIKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
    • SSTPSSTP client instance support
    • STUNNELProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
    • DMVPNMethod of building scalable IPsec VPNs
    • PPTP, L2TPClient/Server services can run simultaneously, L2TPv3 support
    • WireGuardWireGuard VPN client and server support
    • ZeroTierZeroTier VPN
    • Modbus TCP Slave
    • ID filteringRespond to one ID in range [1;255] or any
    • Allow remote accessAllow access through WAN
    • Custom registersMODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality
    • Modbus TCP master
    • Supported functions01, 02, 03, 04, 05, 06, 15, 16
    • Supported data formats8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
    • MQTT gateway
    • GatewayAllows sending commands and receiving data from MODBUS Master through the MQTT broker
    • DNP3
    • Supported modesTCP Master, DNP3 Outstation
    • Date to server
    • ProtocolsHTTP(S), MQTT, Azure MQTT, Kinesis
    • IoT PLATFORMS
    • Clouds of thingsAllows monitoring of: Device data, Mobile data, Network info, Availability
    • ThingWorxAllows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
    • CumulocityAllows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
    • Azure IoT HubCan send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
    • Monitoring and management
    • WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
    • FOTAFirmware update from server, automatic notification
    • SSHSSH (v1, v2)
    • SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET
    • CALLReboot, Status, Mobile data on/off, Output on/off
    • TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
    • MQTTMQTT Broker, MQTT publisher
    • SNMPSNMP (v1, v2, v3), SNMP trap
    • JSON-RPCManagement API over HTTP/HTTPS
    • MODBUSMODBUS TCP status/control
    • RMSTeltonika Remote Management System (RMS)
    • System Characteristics
    • CPUQuad-core ARM Cortex A7, 717 MHz
    • RAM256 MB (100 MB available for userspace)
    • FLASH storage256 MB (80 MB available for userspace)
    • Firmware / Configuration
    • WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup
    • FOTAUpdate FW
    • RMSUpdate FW/configuration for multiple devices at once
    • Keep settingsUpdate FW without losing current configuration
    • Firmware customization
    • Operating systemRutOS (OpenWrt based Linux OS)
    • Supported languagesBusybox shell, Lua, C, C++
    • Development toolsSDK package with build environment provided
    • Location tracking
    • GNSSGPS, GLONASS, BeiDou, Galileo and QZSS
    • CoordinatesGNSS coordinates via WebUI, SMS, TAVL, RMS
    • NMEANMEA 0183
    • Server softwareSupports server software: TAVL, RMS
    • GeofencingMultiple configurable geofence zones
    • USB
    • Data rateUSB 2.0
    • ApplicationsSamba share, USB-to-serial, Modbus gateway
    • External devicesPossibility to connect external HDD, flash drive, additional modem, printer
    • Storage formatsFAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4
    • Input/Output
    • Input1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
    • Output1 x Digital Output, Open collector output, max output 30 V, 300 mA
    • EventsSMS, Email, RMS
    • I/O jugglerAllows setting certain I/O conditions to initiate event
    • Power
    • Connector4-pin industrial DC power socket
    • Input voltage range9 – 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max
    • PoE (passive)Mode B, LAN1 Port, 9 - 50 VDC
    • Power consumptionIdle: <4 W, Max: <18 W
    • Physical Interferences(PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
    • Ethernet5 x RJ45 ports, 10/100/1000 Mbps
    • I/Os1 x Digital Input, 1 x Digital Output on 4-pin power connector
    • Status LEDs3 x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2 x 2.4G and 5G WiFi LEDs
    • SIM2 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
    • Power1 x 4-pin DC power connector
    • Antennas4 x SMA for Mobile, 2 x RP-SMA for WiFi, 1 x SMA for GNSS
    • USB1 x USB A port for external devices
    • ResetReboot/User default reset/Factory reset button
    • Other1 x Grounding screw
    • Physical Specification
    • Casing materialAluminum housing
    • Dimensions (W x H x D)132 x 44.2 x 95.1 mm
    • Weight533 g
    • Mounting optionsDIN rail (can be mounted on two sides), flat surface placement
    • Operating Environment
    • Operating temperature-40 °C to 75 °C
    • Operating humidity10 % to 90 % non-condensing
    • Ingress Protection RatingIP30