
Residual Current Circuit Breaker with Overcurrent Protection Hager ADM470C (4P, 20A, Type A, 30mA, 6kA)
-
- Architecture
- Type of pole4P
- Number of protected poles4
- CurveC
- Safety
- Residual current typeA
- Ingress Protection (IP) classIP2X
- Main electrical attributes
- Rated short-circuit breaking capacity Icn AC according to IEC 60898-16 kA
- Voltage
- Rated insulation voltage Ui500 V
- Rated impulse withstand voltage Uimp4,000 V
- Rated operational voltage Ue230 - 400 V
- Overvoltage category according to IEC 60947-13
- Type voltage supplyAC
- Dielectric strength value of power frequency2 kV
- Electric current
- Rated current20 A
- Rated residual operating current Idn30 mA
- Rated current -25°C23.80 A
- Rated current at -20°C23.50 A
- Rated current -15°C23.20 A
- Rated current -10°C22.90 A
- Rated current -5°C22.50 A
- Rated current at 0°C22.20 A
- Rated current 5°C21.80 A
- Rated current 10°C21.50 A
- Rated current 15°C21.10 A
- Rated current at 20°C20.80 A
- Rated current 25°C20.40 A
- Rated current 30°C20 A
- Rated current 35°C19.60 A
- Rated current at 40°C19.10 A
- Rated current at 45°C18.60 A
- Rated current at 50°C18.20 A
- Rated current 55°C17.70 A
- Rated current 60°C17.20 A
- Correction factor of rating current for 2 devices placed side by side0.80
- Min./max. threshold value of the AC thermal operation1.13 - 1.45 A
- Rated service breaking capacity Ics AC according to IEC 60898-16 kA
- Power
- Total power loss under IN11.70 W
- Frequency
- Frequency50 - 50 Hz
- Installation, mounting
- Nominal tightening torque down terminal2 - 2 Nm
- Nominal tightening torque top terminal2 - 2 Nm
- Type of bottom connection for modular devicesbiconnect
- Use conditions
- Max. altitude2,000 m
- Class of energy limitation I²t3
- Operating temperature-25 - 40 °C
- Storage/transport temperature-55 - 70 °C
- Degree of pollution according to IEC 60664 / IEC 60947-22
- Endurance
- Electric endurance in number of cycles2,000
- Number of mechanical operations4,000
- Connection
- Cross-section of input with screws, for flexible conductors1 - 16 mm²
- Cross-section of input with screws, for massive conductors1 - 25 mm²
- Cross-section of input and output with screws, for flexible conductors1 - 16 mm²
- Cross-section of input and output with screws, for massive conductors1 - 25 mm²
- Capacity
- Number of modules4
- Dimensions
- Height84 mm
- Width71 mm
- Depth70 mm
