
Remote control set GSN ACS-101 1-ch
-
Advantages of ACS-101
- Four operating modes
- Panic button mode (security)
- Switching mode (ON/OFF)
- Hold mode (continous)
- Pulse mode - 1second
The receiver is capable of memorizing up to 680 codes and thus able to
operate with 680 remote controls.
Last event memory - 30 min.The alarm comes on when the electric power supply is disconnected
(PANIC BUTTON MODE).Easy receiver programming by additional remote controls.
SMT technology.
Remote controls
Hand-held push-button transmitters are produced in dual-channel and four-channel standards.
Eachremote control has its own identity code to transmit a radio frequency signal to a remote
receiver. The ACS-101 receiver is capable of memorizing up to 680 different codes and therefore
are able to operate with 680 remote controls, which have different identity codes.Operating range
The operating range of the remote controls depends on the mounting location of the receivers.
The various obstructions, the environmental factors, the radio frequency and electromagnetic
sources might influence the emission of a radio signal and as a result, might shorten the control
range.To reach the precise radio-signal: mount the receiver at least 1.5 meter above the ground,
as far as possible from any radio frequency and electromagnetic sources.
The receiving range in open space is up to 200-250m.SPECIFICATIONS
Power input 12-16VDC Current consumption:
Stand-by mode28mA/12V Active mode 11mA/12V Receiving range in open space up to 250m Operating frequency 433.92MHz Memory capacity 680 codes Alarm period in panic button mode 3sec Warm up period 0.5sec Dry contact relay DC30V/1.0A; DC60V/0.3A; AC125V/0.5A Opening protection in panic button mode TAMPER SWITCH Last event memory in panic button mode 30 min Operating temperature range -20ºC +50ºC Storage temperature range -40ºC +80ºC Dimensions 85mm x 40mm x 20mm Weight 93gr.