Products catalog

  • LED switching power supply 12V 60W 5A IP67 Mean Well LPV-60-12

    Manufacturer
    Mean Well
    • General
    • ModelLPV-60-12
    • DC Voltage12V
    • Rated Current5A
    • Current Range0 ~ 5A
    • Rated Power60W
    • Ripple & Noise (max.)120mVp-p
    • Voltage Tolerance±8.0%
    • Line Regulation±1.0%
    • Load Regulation±6.0%
    • Setup, Rise Time500ms, 20ms / 230VAC; 500ms, 20ms / 115VAC at full load
    • Hold Up Time50ms / 230VAC; 16ms / 115VAC at full load
    • Voltage Range90 ~ 264VAC; 127 ~ 370VDC
    • Frequency Range47 ~ 63Hz
    • Efficiency (Typ.)83%
    • AC Current (Typ.)1.2A / 115VAC; 1A / 230VAC
    • Inrush Current (Typ.)60A at 230VAC (cold start)
    • Leakage Current0.25mA / 240VAC
    • Overload Protection110 ~ 150% rated output power; hiccup mode; auto recovery
    • Over Voltage Protection13.8 ~ 16.2V; shut down output; re-power on to recover
    • Withstand VoltageI/P-O/P: 3KVAC
    • Isolation ResistanceI/P-O/P: >100M Ohms / 500VDC / 25℃ / 70% RH
    • Working Temperature-30 ~ +70℃ (Refer to Derating Curve)
    • Working Humidity20 ~ 90% RH non-condensing
    • Storage Temperature & Humidity-40 ~ +80℃; 10 ~ 95% RH
    • Temp. Coefficient±0.03%/℃ (0 ~ 50℃)
    • Vibration10 ~ 500Hz, 2G 10min./1cycle, 60min. on X, Y, Z axes
    • MTBF5188.4K hrs min. (Telcordia SR-332); 732.1K hrs min. (MIL-HDBK-217F, 25℃)
    • Dimension162.5 x 42.5 x 32 mm (L x W x H)
    • CertificationsUL879, UL1310, CSA C22.2 No. 207-M89, CAN/CSA C22.2 No. 223-M91, BIS IS15885, EAC TP TC 004, IP67, IEC/EN 62368-1
    • EMC EmissionEN55032 (CISPR32) Class B, EN61000-3-2 Class A, EN61000-3-3, EAC TP TC 020
    • EMC ImmunityEN61000-4-2,3,4,5,6,8,11; EN55035; light industry level, EAC TP TC 020
    • Packing0.4Kg/unit; 32pcs/13.8Kg/0.66CUFT
    • FeaturesConstant voltage design, universal AC input/full range, withstand 300VAC surge input for 5 seconds, protections: short circuit/overload/overvoltage, cooling by free air convection, compact size, fully encapsulated with IP67, fully isolated plastic case, Class II power unit, Class 2 power unit, LPS compliant, suitable for LED-related fixtures or appliances (e.g. LED decoration/advertisement devices), 100% full load burn-in test, low cost, high reliability, 2-year warranty
    • Max. No. of PSUs on 16A Circuit Breaker3 units (Type B) / 6 units (Type C) at 230VAC