| The maximum length of the sensitive element (SE-86) in a single zone up to 300 m; |
| The maximum length of the non-sensitive element (NON-SE) in a single zone up to 300 m; |
| Entrance areas 2 or 4 independent zones; |
| Relay outputs 2 or 4 independent outputs; |
| Integrity control cables, common Relay output; |
| Power source 10-28 V (DC); |
| With voltage drop below 9,5 V the protection system goes into the “Alarm” mod.; |
| Current consumption < 25 mA; |
| Operating temperature from -40 °C to +50 °C; |
| Alarm, control integrity, tamper output dry relay contact; |
| The duration of alarm signal is 1s minimum; |
| Fixed resistor value to control integrity of sensitive and non-sensitive elements; |
| Fixing on the fence with plastic ties; |
| Compatibility any alarm control panel; |
| IP class IP55; |
| Set up of equipment using an Android device (tablet, phone) is done two-ways: |
| 1. Using converter RS 485-USB through connection cable. |
| 2. Using converter FORTEZA RS-BL through BLUETOOTH network or connection cable. |