Products catalog

Home/Video, audio, intrusion and access control systems/Access Control/Ubiquiti Access Control
  •   Access control system reader Ubiquiti UniFi UA-G3-W

    Access control system reader Ubiquiti UniFi UA-G3-W

    Inquire about this item
    Price 174.19 €
    Want another price? Suggest yours!
    In stock.

    In stock: 5 pcs

    • General
    • Dimensions93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")
    • Weight82 g (2.9 oz)
    • Enclosure materialPolycarbonate, glass
    • Mounting materialAluminum alloy
    • MountingIn wall, gang box
    • WeatherproofingIP55
    • Networking interface(1) 10/100 MbE RJ45 port
    • ConnectivityBLE 4.1, NFC
    • Power methodPoE, UL 294 Power-limited Class 2 PSU, UL 60950-1/62368-1 LPS/PS2 PSU
    • Supported voltage range48V DC
    • Max. power consumption5W
    • ESD/EMP protectionAir: ±15kV, contact: ±8kV
    • SensorsProximity sensor
    • Speaker(1) 8 ohm, 0.7W
    • LEDsR/G/B/W (Learn more)
    • Button(1) Factory-reset
    • NFC frequency13.56 MHz
    • NFC read range< 30 mm
    • NFC technologyISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340), MIFARE Classic / MIFARE DESFIRE, Sony FeliCa™ (ID only), NFC Forum tags T1T, T2T, T3T, T4T and T5T, ECP 2.0
    • Operating environmentOutdoor use
    • Ambient operating temperature-30 to 45° C (-22 to 113° F)
    • Ambient operating humidity5 to 90% noncondensing
    • Software informationThe software version of a product can be checked at https://unifi.ui.com
    • UL 294 levelDestructive attack: Level I, Line security: Level I, Endurance: Level I, Standby power: Level I
    • UL 294 statementCompliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
    • PoE cabling requirementsCat 5e cabling is the minimum recommended. The performance category should match the required transmission speed at the installation site. Minimal conductor gauge: 26 AWG (0.13 mm²) for patch cords; 24 AWG (0.21 mm²) for horizontal or riser cable.
    • CAN/ULC-60839-11-1 GradeGrade assignment: I
    • CertificationsCE, FCC, IC, UL 294, CAN/ULC-60839-11-1