
6-port switch CUDY FS1006P
ManufacturerCudy-
- General
- Interfaces10/100 Mbps RJ45 Ports: 2, 10/100 Mbps RJ45 PoE Ports: 4
- Max Power on a Single PoE Port30W
- PoE Port NotesThe PoE ports comply with IEEE 802.3at/af standards.
- Extend Mode Ports#1~#4
- VLAN Mode Ports#1~#4
- LEDPower, Link/ACT of Each Ethernet Port
- DIP Mode (SW)Power Input: AC Inlet
- Physical ButtonsVLAN/Default/Extend DIP Switch
- PerformanceCopper Speed and Distance: Cat. 3 or higher cable: 100 meters at 10 Mbps, Cat. 5 or higher cable: 100 meters at 100 Mbps, Cat. 5e or higher cable: 250 meters at 10 Mbps
- Copper Speed and Distance Note250-meter transmission is only available on the Extend Mode ports.
- MAC Address Table1024
- Max Switching Capacity1.2 Gbps
- Max Forwarding Rate0.8928 Mpps
- Packet Buffer448 Kbit
- Power MethodsAC Input: 100 V - 240 V, 50 Hz, Output: 52 V, 1.25 A
- Power Supply65W
- Max Power Excluding PoE1W
- Switching802.3 Protocols: 802.3i 10BASE-T, 802.3u 100BASE-TX, 802.3x Flow Control, 802.3af PoE, 802.3at PoE
- ReliabilityGrounding Methods: Three-Prong Plug, Grounding Point
- EnvironmentOperating Temperature: 0~40 ℃ (32~104 ℉), Storage Temperature: -40~70℃ (-40~158 ℉), Operating Humidity: 10~90% non-condensing, Storage Humidity: 10~95% non-condensing
- MechanicalDimension: 200×118×44 mm (7.87×4.65×1.73 inches)
- Casing MaterialMetal
- InstallationDesktop, Wall-mount
